Electrolysis — Question 8

Section 17-7 · Chemistry pages 3001–3002

Show solutionHide solution

Question 8

Add kinetic and resistive voltage requirements

A hypothetical electrolyzer has reversible decomposition voltage 1.23 V. At the desired current its anodic and cathodic overpotential magnitudes are 0.35 V and 0.25 V. Current is 2.00 A and cell resistance is 0.400 ohm. Use Vapplied=Vrev+ηa+ηc+IRV_{applied}=V_{rev}+\eta_a+\eta_c+IR.

Diagram shown in the original SVG worksheet.

  1. Estimate required applied voltage and input power.

  2. Explain why the thermodynamic decomposition voltage alone does not predict the voltage needed at finite current.

Question 8 - Solution

Add kinetic and resistive voltage requirements

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

The resistive drop is 0.800 V, so required voltage is 1.23+0.35+0.25+0.80=2.631.23+0.35+0.25+0.80=2.63 V. Input power is IV=5.26IV=5.26 W.

(b) Analysis

Finite rates need kinetic driving forces at the interfaces, while ionic and electronic resistance dissipate additional voltage. The reversible threshold is approached only in an ideal limiting process.

Check and interpretation

Overpotentials are supplied as positive loss magnitudes here.