Corrosion — Question 6

Section 17-6 · Chemistry pages 2977–2978

Show solutionHide solution

Question 6

Convert a corrosion current to metal loss

Assume all anodic current comes from Fe→Fe2++2e−Fe\to Fe^{2+}+2e^-. A constant 2.00 mA flows for 24.0 h. Use F = 96485 C/mol and molar mass Fe = 55.85 g/mol.

Diagram shown in the original SVG worksheet.

  1. Calculate total charge and predicted iron mass loss.

  2. Explain why gross mass of an uncleaned rusty specimen may not show that same decrease.

Question 6 - Solution

Convert a corrosion current to metal loss

Diagram shown in the original SVG worksheet.

(a) Reasoning and result

Q=0.00200(24×3600)=172.8Q=0.00200(24\times3600)=172.8 C. Iron loss is m=QM/(2F)=0.05001m=QM/(2F)=0.05001 g.

(b) Analysis

Attached corrosion products contain oxygen, hydrogen and possibly electrolyte species in addition to iron. Their added mass can hide metal loss; a properly defined cleaned-metal measurement is needed for comparison.

Check and interpretation

The calculation assumes two electrons per dissolved Fe and 100 percent allocation to that oxidation.