Density — Question 4

Section 1-8 · Chemistry pages 153–154

Show solutionHide solution

Question 4

Distinguish wall density from the average density of a hollow object

A sealed hollow object has mass 18.0 g and external volume 30.0cm330.0\ \mathrm{cm^3}. Its wall material has density 1.20gcm−31.20\ \mathrm{g\,cm^{-3}}; neglect the mass of enclosed air. Water has density 1.00gcm−31.00\ \mathrm{g\,cm^{-3}}. For floating equilibrium use: displaced water mass equals object mass.

Diagram shown in the original SVG worksheet.

  1. Calculate the object's average density and decide whether it floats in water.

  2. Find the volume of wall material and the enclosed cavity volume.

  3. Calculate the submerged fraction of external volume when it floats. Explain why using the wall density alone would mislead.

Question 4 - Solution

Distinguish wall density from the average density of a hollow object

Diagram shown in the original SVG worksheet.

(a) Average over the external volume

ρavg=18.030.0=0.600gcm−3.\rho_{\mathrm{avg}}=\frac{18.0}{30.0}=0.600\ \mathrm{g\,cm^{-3}}.Because this is below the water density, the sealed object floats under the stated assumptions.

(b) Account for the cavity

Vwall=18.01.20=15.0cm3,V_{\mathrm{wall}}=\frac{18.0}{1.20}=15.0\ \mathrm{cm^3},Vcavity=30.0−15.0=15.0cm3.V_{\mathrm{cavity}}=30.0-15.0=\boxed{15.0\ \mathrm{cm^3}}.The cavity contributes volume with negligible mass.

(c) Apply the displacement condition

Vdisplaced=18.01.00=18.0cm3,f=18.030.0=0.600.V_{\mathrm{displaced}}=\frac{18.0}{1.00}=18.0\ \mathrm{cm^3},\qquad f=\frac{18.0}{30.0}=\boxed{0.600}.Thus 60.0% of the external volume is submerged. The wall material alone is denser than water, but the sealed object includes its cavity.

Check and interpretation

If water entered the cavity, these sealed-object assumptions would fail and the floating behavior could change.